Repair Procedures: Removal
WARNING: This page is about a different car, the 2020 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the ignition switch OFF and disconnect the battery negative (-) cable.
- Disconnect the CVVT oil control valve connector (A).
- Remove the installation bolt (B), and then remove the valve from the engine.
[Bank 1/Intake]
 Courtesy of HYUNDAI MOTOR AMERICA
|
[Bank 1/Exhaust]
 Courtesy of HYUNDAI MOTOR AMERICA
|