Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2020 >> Optima EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Engine Control System - 1.6L) >> Ambient Temperature Sensor (ATS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2020 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the front bumper.

    (Refer to Body - "FRONT BUMPER ")

  3. Disconnect the connector, an then remove the ambient temperature sensor (A).
    G12596626Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals