DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	Voltage monitoring	Poor connector connection Faulty output speed sensor circuit Faulty output speed sensor
Enable Conditions	Battery voltage is higher than 10V Engine speed higher than 400RPM Vehicle speed is higher than 50km/h (31mph) Shift lever position in "D" or "SPORTS" (forward gear)
Threshold Value	Vehicle speed equivalent to output speed is less then vehicle speed * 0.3 or higher than vehicle speed * 1.7 (ex. less than 15km/h (9mph) or higher than 85km/h (53mph) when vehicle speed is 50km/h (31mph))
Fail Safe	Prior to fault confirm: gear fixed at current range, output speed backup signal is fixed at 5th gear After fault confirm: manual gear shift from 2nd to 5th is allowed Gear is fixed at 5th gear at 'D" Output speed back-up signal output adaptive Learning is prohibited
Detecting Time	6s
MIL ON Condition	2 driving cycles