Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2020 >> Cadenza Technology >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Airbag Modules And Clock Spring >> Passenger Airbag (PAB) Module >> Repair Procedures >> Installation

Repair Procedures: Installation

  1. Disconnect the battery negative terminal, and wait for at least three minutes before beginning to work.
  2. Install in the reverse order of removal.
  3. Reconnect the negative battery terminal.
  4. After installing the passenger airbag (PAB), confirm proper system operation:

    Switch "ON" the ignition. The SRS indicator light should turn on for about six seconds and then off.

scientia non olet · About Mike's Workshop Manuals