Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2020 >> Cadenza Technology >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Fuel Delivery System (PHEV)) >> Delivery Pipe >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2020 Kia Niro. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Do not reuse injector fixing clips.
  • Install the component to the specified torque.
  • Note that internal damage may occur when the component is dropped. In this case, use it after inspecting.
  • Apply engine oil to the injector O-ring.
  • Do not reuse injector o-rings.
  • Do not reuse bolts.
  • When inserting the injector, be careful not to damage the injector tip.
  • Do not reuse the high pressure fuel pipe.
  1. Install in the reverse order of removal.
scientia non olet · About Mike's Workshop Manuals