Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2020 >> Cadenza Technology >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Program (Esp) System >> Troubleshooting >> Failure Diagnosis >> ABS Does Not Operate >> Inspection Procedures >> DTC Inspection

DTC Inspection

  1. Connect the KDS with the data link connector and switch "ON" the ignition.
  2. Check that the DTC code is set off.
  3. Is the DTC code set off?

    Yes 

    • Check the power source circuit.

    No 

    • Erase the DTC and recheck using KDS.
scientia non olet · About Mike's Workshop Manuals