Monitor GDS Data
WARNING: This page is about a different car, the 2018 Hyundai Accent. However, it is still accessible from the selected car via links, so may be relevant.
- Connect GDS to Data Link Connector (DLC).
- Turn "ON" the ignition switch.
- Monitor the 'ON-OFF' condition of Brake lamp switch on the "Current Data" menu of the GDS.
Specification :Push the Brake pedal - Brake Lamp Switch 'ON'
- Is parameter displayed within specifications?
YES
- Fault is intermittent caused by poor connection. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary, and then go to "Verification of Vehicle Repair " procedure.
NO
- Go to next step.