Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2019 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (Antilock Brake System/Electronic Stability Control System Diagnosis) >> DTC C1648-08: CAN Signal Error EMS For ACC/SCC >> DTC Information >> DTC Detecting Condition

DTC Information: DTC Detecting Condition

WARNING: This page is about a different car, the 2018 Hyundai Accent. However, it is still accessible from the selected car via links, so may be relevant.
Trouble shooting Condition Possible Cause
Main action
  • Monitor CAN message
  1. Check PCM (ECM) system
Threshold value
  • Monitoring the error of Engine RPM in EMS message during driving without CAN hardware error and CAN bus off.
    • Specific times: control in progress - 50 times, no control: 150 times
MIL
  • The ABS/ESP (ESC)/DBC warning lamp is activated.
Reset condition
  • Turn ignition switch off and back on.
scientia non olet · About Mike's Workshop Manuals