DTC Information: DTC Detecting Condition
WARNING: This page is about a different car, the 2018 Hyundai Accent. However, it is still accessible from the selected car via links, so may be relevant.
| Trouble shooting |
Condition |
Possible Cause |
| Main action |
|
- Open circuit in brake switch line
- Faulty brake light switch
- Faulty input stage in ESP (ESC)
|
| Threshold value |
- In case of over 10 kph (6.2 mph) speed and under 5 bar of Pressure sensor input, monitoring a fault if Brake light signal keeps 'ON' for 60 seconds.
- Monitoring a fault if Brake light signal keeps 'OFF' for 1 second in case of over 15 bar of Pressure sensor input.
|
| MIL |
- Inhibit the ESP (ESC) control and allow the ABS/EBD control.
- The ESP (ESC) warning lamp is activated.
|
| Reset condition |
- Turn ignition switch off and on.
|