Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2019 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (Antilock Brake System/Electronic Stability Control System Diagnosis) >> DTC C1201-02: Wheel Speed Sensor Front-LH Range/Performance/Intermittent >> DTC Inspection >> Monitor GDS Data

Monitor GDS Data

WARNING: This page is about a different car, the 2018 Hyundai Accent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch "ON".
  2. Connect GDS to Data Link Connector (DLC).
  3. Start and drive vehicle in gear and maintain vehicle speed at or above 40km/h. (24mph)
  4. Monitor the "WHEEL SPEED SENSOR" parameter on the "Current Data" menu of the GDS.

    Specification  :

    Compare the result with other parameters of wheel speed sensor. If it is the same as other parameters, it is in normal condition.

  5. Is the result within specifications?

    YES 

    • Fault can be intermittent, caused by either faulty ESP (ESC), wheel speed sensor, or interference between harnesses. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "Verification of Vehicle Repair " procedure.

    NO 

    • Go to next step.
scientia non olet · About Mike's Workshop Manuals