Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2019 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Engine Control System) >> Variable Intake Solenoid (VIS) Valve >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2018 Hyundai Accent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the ETC module.

    (Refer to Engine Control System - "ETC (ELECTRONIC THROTTLE CONTROL) SYSTEM ")

  3. Disconnect the vacuum hoses (B) from the valve.
  4. Remove the installation bolts, and then remove the valve from the surge tank.
G12598577Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals