Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2019 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Motor Driven Power Steering System Diagnosis) >> DTC C1604-04: ECU Hardware Error >> Verification Of Repair >> Verification Of Vehicle Repair

Verification Of Vehicle Repair

WARNING: This page is about a different car, the 2018 Hyundai Accent. However, it is still accessible from the selected car via links, so may be relevant.

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect GDS and select "Diagnostic Trouble Codes (DTC's)" mode.
  2. Using a GDS, Clear DTC.
  3. Operate the vehicle within DTC Detecting Condition in General Information.
  4. Are any DTCs present?

    YES 

    NO 

    • System is performing to specification at this time.
scientia non olet · About Mike's Workshop Manuals