Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2019 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Engine Control System Diagnosis (1 Of 3)) >> DTC P0136-00: O2 Sensor Circuit (Bank 1/Sensor 2) >> Wiring Inspection >> Signal Circuit Inspection

Signal Circuit Inspection

WARNING: This page is about a different car, the 2018 Hyundai Accent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch "OFF" & Disconnect HO2S (S2) connector.
  2. Turn the ignition switch "ON" & ENG "OFF".
  3. Measure the voltage between signal terminal of HO2S (S2) harness connector and chassis ground.

    Specification:  Approx 0.6V

  4. Is the measured voltage within specification?

    YES 

    NO 

scientia non olet · About Mike's Workshop Manuals