Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2019 >> Sorento L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Engine Control System - 3.3L) >> Engine Coolant Temperature Sensor (ECTS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
  2. Remove the air cleaner assembly.

    (Refer to Engine Mechanical System - "AIR CLEANER ")

  3. Disconnect the engine coolant temperature sensor connector (A).
  4. Remove the spring clip (B), and then pull the sensor from the water temperature control assembly.
    CAUTION:
    • Note that engine coolant may leak out of the water temperature control assembly when removing the sensor.
G12885586Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals