Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2019 >> Sedona L >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Blind Spot Detection System) >> Blind Spot Detection Switch >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2020 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel.

    (Refer to Body - "CRASH PAD LOWER PANEL ")

  3. Remove the crash pad lower switch (A) after loosening the mounting screws.
    G13046820Courtesy of KIA MOTORS AMERICA, INC.
  4. Disconnect the connector (A) from the crash pad lower switch.
    G13046821Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals