Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2019 >> Sedona L >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Engine Control System) >> Manifold Absolute Pressure Sensor (MAPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2020 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
  2. Disconnect the vacuum hose (A).
  3. Disconnect the manifold absolute pressure sensor connector (B).
  4. Remove the sensor after loosening the mounting bolt.

    Manifold Absolute Pressure Sensor (MAPS) mounting bolt: 

    9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)

    G13044228Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals