| DTC Strategy |
- Engine speed is below the target while ISC torque is around the maximum
|
- Intake system for blockage
- Throttle plate for carbon deposits
|
| Enable Conditions |
- Time after Engine Start is greater than 2s
- ECT is greater than 60°C (140°F)
- IAT is greater than -10.5°C (13.1°F)
- Accel Pedal is same as 0%
|
| Threshold Value |
- Difference of Target engine speed at Actual engine speed is greater than 200RPM
- Difference of Max idle torque at Actual idle torque is greater than 10Nm
|
| Diagnostic Time |
|
| MIL ON Condition |
|