Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2019 >> Optima S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 221 (Engine Control System (PHEV)) >> Heated Oxygen Sensor (HO2S) >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF.
  2. Disconnect the HO2S connector.
  3. Measure resistance between the HO2S terminals 2 and 5 [B1/S1].
  4. Measure resistance between the HO2S terminals 3 and 4 [B1/S2].
  5. Check that the resistance is within the specification.

    HO2S [Bank 1/Sensor 1] 

    Specification:  2.4 - 4.0 Ω [20°C (68°F)]

    HO2S [Bank 1/Sensor 2] (Binary type) 

    Specification:  Approx. 9.0 Ω [20°C (68°F)]

scientia non olet · About Mike's Workshop Manuals