Measuring Resistance

WARNING: This page is about a different variant/trim than selected.

Disconnect the cruise control switch connector from the control switch.

Measure resistance between terminals on the control switch when each function switch is ON (switch is depressed).

Function switch	Terminal (A Connector)	Resistance (kΩ) [± 5%]
CANCEL	2 - 5	0.18
SET -	2 - 5	0.33
RES +	2 - 5	0.55
CRUISE	2 - 5	0.88
ASCC	2 - 5	2.54

If not within specification, replace switch.