Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2019 >> Optima EX >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Tires/Wheels/Alignment (Except HEV) >> Wheel >> Repair Procedures >> Run Out Inspection

Run Out Inspection

  1. Jack up the vehicle.
  2. Measure the wheel Run-out by using a dial indicator as illustration below.
    Run-out Aluminum
    Radial mm (in.) Below 0.3 (0.0118)
    Lateral mm (in.) Below 0.3 (0.0118)
  3. If measured value exceeds the standard value, replace the wheel.
G12916710Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals