Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2019 >> Optima EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Hybrid Control System - General Information (PHEV)) >> Troubleshooting >> Basic Troubleshooting >> Wire Harness Inspection Procedure

Wire Harness Inspection Procedure

WARNING: This page is about a different car, the 2018 Kia Optima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before removing the wire harness, check the wire harness position and crimping in order to restore it correctly.
  2. Check whether the wire harness is twisted, pulled or loosened.
  3. Check whether the temperature of the wire harness is abnormally high.
  4. Check whether the wire harness is rotating, moving or vibrating against the sharp edge of a part.
  5. Check the connection between the wire harness and any installed part.
  6. If the covering of wire harness is damaged; secure, repair or replace the harness.
scientia non olet · About Mike's Workshop Manuals