Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2019 >> Niro Plug-In Hybrid EX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 52 (Integrated Gateway Power Module Diagnosis (HEV)) >> DTC C1819-00: CAN Time-Out TPMS >> Verification Of Repair

Verification Of Repair

WARNING: This page is about a different variant/trim than selected.

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect KDS to Data Link Connector (DLC), and monitor "Diagnostic Trouble Codes (DTC)".
  2. Clear all DTCs in the system with KDS.
  3. Operate system or vehicle within DTC detecting condition in DTC Detecting Condition chart.
  4. Monitor "Diagnostic Trouble Codes (DTC)" with KDS and verify that any DTC is stored.
  5. Verify that the DTC is cleared and system operates correctly.

    Good 

    • Problem is corrected and the system operation performs to specification at this time.

    No Good 

    • Go to applicable troubleshooting procedure.
scientia non olet · About Mike's Workshop Manuals