Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2019 >> Niro Plug-In Hybrid EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Engine Control System (PHEV)) >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2018 Hyundai Ioniq. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the air cleaner assembly

    (Refer to "AIR CLEANER ")

  3. Disconnect the ETC module connector (A).
  4. Remove the ETC module (B) from the engine after loosening the bolts.
    G12727115Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals