Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2019 >> Niro EX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Engine Control System (PHEV)) >> Purge Control Solenoid Valve (PCSV) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
  2. Remove the air cleaner assembly.

    (Refer to " AIR CLEANER  ") 

  3. Disconnect the purge control solenoid valve connector (A).
  4. Disconnect the vapor hoses (B) from the purge control solenoid valve.
  5. Remove the purge control solenoid valve.
    G12696188Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals