Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2019 >> Niro EX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Hybrid Control System (PHEV)) >> HCU (Hybrid Control Unit) >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
WARNING:
  • Be sure to read and follow the "GENERAL SAFETY INFORMATION & CAUTION " before doing any work related with the high voltage system. Failure to follow the safety instructions may result in serious electrical injuries.
  • Be sure to read and follow the "HIGH VOLTAGE SHUT-OFF PROCEDURES " before doing any work related with the high voltage system. Failure to follow the safety instructions may result in serious electrical injuries.
  1. Refer to " HPCU (HYBRID POWER CONTROL UNIT)  ". 
    NOTE:
    • The HCU is integrated into the HPCU that can't be disassembled. So refer to "HPCU (HYBRID POWER CONTROL UNIT) " for the removal or installation procedure of the HCU.
scientia non olet · About Mike's Workshop Manuals