Component Inspection
| Inspection Condition | (+) Probe | (-) Probe | Reference | ||
|---|---|---|---|---|---|
| Connector | Terminal | Connector | Terminal | ||
|
Fuel sender (component side) | 5 (fuel sender +) | Fuel sender (component side) | 6 (fuel sender -) | Table 1 |
FUEL SENDER AND FUEL PUMP MOTOR SPECIFICATION
| Float Position | Sender Resistance (Ω) |
|---|---|
| E | 148.5 to 156.5 |
| 1/2 | 83.5 to 84.5 |
| F | 6.5 to 8.5 |
Good
- Repair or replace as necessary and then go to "VERIFICATION OF REPAIR " procedure.
No Good
- Carefully re-do this troubleshooting guide steps.
- If no problems were found with the circuits or connectors, replace the Fuel Sender & Fuel Pump Motor and go to "VERIFICATION OF REPAIR " procedure.