Inspection Procedure
- Visually and/or physically inspect for the following conditions;
- Vacuum hoses for splits, kinks and improper connections.
- Throttle body gasket.
- Gasket between intake manifold and cylinder head.
- Seals between intake manifold and fuel injectors.
- Exhaust system between O2 sensor and the three-way catalyst for air leakage.
- Air cleaner filter element for excessive dirt or for any foreign objects.
- Throttle body inlet for damage or for any foreign objects.
- Throttle bore and throttle plate for chocking and for any foreign objects.
- Restricted exhaust system.
- Has any problems been found?
Good
- Go to "EVAP SYSTEM INSPECTION " procedure.
NO Good
- Repair as necessary and go to "VERIFICATION OF REPAIR " procedure.