Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2018 >> Sorento L >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Engine Control System - 1.6L T) >> Accelerator Position Sensor (APS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2018 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the negative (-) battery terminal.
  2. Disconnect the accelerator position sensor connector (A).
  3. Remove the mounting nuts (B).
    Fig 1: Locating Accelerator Position Sensor Connector And Mounting Nuts
    G12238655Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the cap (A)
    Fig 2: Locating Accelerator Pedal Module Cap
    G12238656Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the mounting bolt (A), and then remove the accelerator pedal module.
Fig 3: Locating Accelerator Pedal Module Mounting Bolt
G12238657Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals