Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2018 >> Sedona LX >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (Airbag Module And Clock Spring) >> Passenger Airbag (PAB) Module >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2018 Kia Cadenza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable, and wait for at least three minutes before beginning to work.
  2. Remove the main crash pad.

    (Refer to Body (Interior and Exterior) - "MAIN CRASH PAD ASSEMBLY ")

    NOTE: If the PAB has been deployed, replace the damaged crash pad.
  3. Remove the PAB mounting bolts.

    Tightening torque: 

    3.8 - 5.8 N.m (0.39 - 0.6 kgf.m, 2.8 - 4.3 lb-ft)

    Fig 1: Locating PAB Mounting Bolts
    G12294369Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals