Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2018 >> Sedona L >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Engine Control System) >> Knock Sensor (KS) >> Repair procedures >> Installation

Repair procedures: Installation

WARNING: This page is about a different car, the 2018 Kia Cadenza. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Install the component to the specified torque.
  • Note that internal damage may occur if the component drops. In this case, use it after inspecting.
  • The sensor connector must be installed parallel to the engine.
  1. Install in the reverse order of removal.
scientia non olet · About Mike's Workshop Manuals