Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2018 >> Sedona L >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Supplemental Restraint System Control Module (SRSCM) & Sensors) >> Occupant Classification System (OCS) >> Repair Procedures >> Removal >> Occupant Classification System (OCS) Unit

Occupant Classification System (OCS) Unit

WARNING: This page is about a different car, the 2018 Kia Cadenza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
  2. Remove the front passenger seat assembly.

    (Refer to Body - "FRONT SEAT ASSEMBLY ")

  3. Disconnect the occupant classification system unit connector (A).
    Fig 1: Locating Occupant Classification System Unit Connector
    G12294349Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the occupant classification system unit (A) after loosening the mounting screws.

    Tightening torque: 

    1.5 - 2.5 N.m (0.1 - 0.2 kgf.m, 1.1 - 1.8 lb.ft)

    Fig 2: Locating Occupant Classification System Unit
    G12294350Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals