Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2018 >> Sedona L >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Front Suspension System And Front Alignment) >> Front Strut Assembly >> Repair Procedures >> Inspection >> Disposal

Repair Procedures: Inspection: Disposal

WARNING: This page is about a different car, the 2017 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fully extend the piston rod.
  2. Drill a hole on the A section to remove gas from the cylinder.
Fig 1: Drill Hole On Section
G12264518Courtesy of KIA MOTORS AMERICA, INC.
CAUTION: While the released gas is harmless, be careful as chips may stir up from drilling. Be sure to wear safety goggles or eye protection when performing this task.
scientia non olet · About Mike's Workshop Manuals