Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2018 >> Sedona L >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Engine Control System) >> CVVT Oil Temperature Sensor (OTS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the air cleaner assembly.

    (Refer to Engine Mechanical System - "AIR CLEANER ")

  3. Disconnect the connector (A), and then remove the CVVT oil temperature sensor (B).
    Fig 1: Locating CVVT Oil Temperature Sensor And Connector
    G12274651Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals