Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2018 >> Sedona EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Front Axle Assembly) >> Front Hub/Knuckle/Tone Wheel >> Repair Procedures >> Disassembly

Repair Procedures: Disassembly

WARNING: This page is about a different car, the 2017 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the brake disc (B) from the knuckle assembly (A).

    Tightening torque: 

    4.9 ~ 5.9 N.m (0.5 ~ 0.6 kgf.m, 3.6 ~ 4.3 Ib-ft)

    Fig 1: Remove Brake Disc From Knuckle Assembly
    G12264496Courtesy of KIA MOTORS AMERICA, INC.
  2. Remove the hub assembly mounting bolts (B) from the knuckle (A).

    Tightening torque: 

    78.4 ~ 98.0 N.m (8.0 ~ 10.0 kgf.m, 57.8 ~ 72.3 lb-ft)

    Fig 2: Remove Hub Assembly Mounting Bolts From Knuckle
    G12264497Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the hub assembly (C) and the dust cover (B) from the knuckle (A).
    CAUTION: Do not disassemble the hub assembly.
    Fig 3: Remove Hub Assembly & Dust Cover From Knuckle
    G12264498Courtesy of KIA MOTORS AMERICA, INC.
  4. Reassembly in the reverse order of disassembly.
scientia non olet · About Mike's Workshop Manuals