Repair Procedures: Disassembly

WARNING: This page is about a different car, the 2017 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ball joint after loosening the nut (A).
Tightening torque : 117.7 - 137.3 N.m (12.0 - 14.0 kgf.m, 86.6 - 101.3 lb.ft)

Fig 1: Locating Ball Joint Nuts
Courtesy of KIA MOTORS AMERICA, INC.
NOTE:
- Using a plastic hammer, remove the ball joint.
- Do not damage the lower arm.
Fig 2: Remove Ball Joint
Courtesy of KIA MOTORS AMERICA, INC.
Install a new ball joint and then tighten the nut (A).
Tightening torque : 117.7 - 137.3 N.m (12.0 - 14.0 kgf.m, 86.6 - 101.3 lb.ft)

Fig 3: Locating Ball Joint Nuts
Courtesy of KIA MOTORS AMERICA, INC.

NOTE: When replace the ball joint with a new one, insert the bolt (A) into the ball joint with a certain pressure.
Insert the bolt to the ball joint without any gap.

Fig 4: Insert Bolts
Courtesy of KIA MOTORS AMERICA, INC.