Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2018 >> Sedona EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Front Suspension System And Front Alignment) >> Front Alignment >> Repair Procedures >> Front Wheel Alignment >> Caster

Front Wheel Alignment: Caster

WARNING: This page is about a different car, the 2017 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.

Caster angle:4.29° ± 0.5°

Fig 1: Check Caster Angle
G12264572Courtesy of KIA MOTORS AMERICA, INC.
NOTE:
  • Any worn, loose or damaged parts of the front suspension assembly must be replaced prior to measuring front wheel alignment.
  • Camber and caster are preset to the specified value at the factory and don't need to be adjusted.
  • If the camber and caster are not within specifications, replace bent or damaged parts.
scientia non olet · About Mike's Workshop Manuals