Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2018 >> Sedona EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Engine Control System) >> Fuel Tank Pressure Sensor (FTPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the service cover (A).
    Fig 1: Locating Service Cover
    G12274659Courtesy of KIA MOTORS AMERICA, INC.
  3. Disconnect the fuel tank pressure sensor connector (A).
  4. Remove the fuel tank pressure sensor (A) after releasing the hooks veritically.
    Fig 2: Locating Fuel Tank Pressure Sensor Connector
    G12274660Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals