Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2018 >> Sedona EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 135 (Surround View Monitoring (SVM) System) >> Surround View Monitoring Switch >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2018 Kia Cadenza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the console upper cover.

    (Refer to Body - "FLOOR CONSOLE ")

  3. Remove the console upper cover mounting wiring connector (A).
    Fig 1: Locating Console Upper Cover Mounting Wiring Connector
    G12298998Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the console upper cover switch (A) after loosening the mounting screws.
    Fig 2: Removing Console Upper Cover Switch Mounting Screws
    G12298999Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals