Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2018 >> Sedona EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 126 (Integrated Gateway Power Control Module Diagnosis) >> DTC B2801-00: CAN Single Line Error M-CAN >> DTC Information >> DTC Detecting Condition

DTC Information: DTC Detecting Condition

WARNING: This page is about a different car, the 2018 Kia Cadenza. However, it is still accessible from the selected car via links, so may be relevant.
Item Detecting Condition Possible Cause
DTC Strategy
  • CAN signal monitoring
  1. Poor connector connection
  2. Open or short in M-CAN High line
  3. Open or short in M-CAN low line
  4. Faulty modules that connected to MCAN
Enable Condition
  • Battery voltage
Threshold Value
  • M-CAN line error is detected
Diagnosis Time
  • Immediately
Erase Condition
  • Erase with GDS/KDS after the failure solved
  • The DTC automatically deleted after the failure monitoring for ignition "ON"/"OFF" 30 times
scientia non olet · About Mike's Workshop Manuals