Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2018 >> Optima Plug-In Hybrid EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Surround View Monitoring (SVM) System (PHEV)) >> Surround View Monitoring Switch >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Kia Optima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the console upper cover.

    (Refer to body - "FLOOR CONSOLE ASSEMBLY ")

  3. Remove the SVM switch (A) after loosening the screws.
G12351951Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals