Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2018 >> Optima Plug-In Hybrid EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Engine Control System (PHEV)) >> Electric EGR Control Valve >> Repair Procedures >> Inspection >> [Motor]

Repair Procedures: Inspection: [Motor]

WARNING: This page is about a different car, the 2017 Kia Optima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF.
  2. Disconnect the EEGR valve connector.
  3. Check that the EEGR valve is stuck by foreign material.
  4. Measure resistance between motor 1 and 3 control terminals of the motor.
  5. Check that the resistance is within the specification.
Item Specification
Coil Resistance (Ω) 2.37 - 2.7
scientia non olet · About Mike's Workshop Manuals