Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2018 >> Optima Plug-In Hybrid EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Electronic Stability Control (ESC) System (PHEV)) >> Front Wheel Speed Sensor >> Repair Procedures >> Remove

Repair Procedures: Remove

WARNING: This page is about a different car, the 2017 Kia Optima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wheel & tire (A).

    Tightening Torque: 

    88.3 - 107.9 N.m (9.0 - 11.0 kgf.m, 65.1 - 79.6 lb.ft)

    G12350278Courtesy of KIA MOTORS AMERICA, INC.
    NOTE: Be careful not to damage to the hub bolts when removing the front wheel and tire (A).
  2. Remove the front wheel speed sensor mounting bolt (A).

    Tightening Torque: 

    8.8 - 13.7 N.m (0.9 - 1.4 kgf.m, 6.5 - 10.1 lb.ft)

    G12350279Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the front wheel house cover.
  4. Remove the mounting bolts (A).
    G12350280Courtesy of KIA MOTORS AMERICA, INC.
  5. Disconnect the front wheel speed sensor connector (A), then remove the front wheel speed sensor.
G12350281Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals