Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2018 >> Optima Plug-In Hybrid EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Fuel Delivery System (PHEV)) >> Delivery Pipe >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2017 Kia Optima. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Do not use already used injector fixing clip again.
  • Install the component with the specified torques.
  • Note that internal damage may occur when the component is dropped. In this case, use it after inspecting.
  • Apply engine oil to the injector O-ring.
  • Do not use already used injector O-ring again.
  • Do not use already used bolt again.
  • When insert the injector, be careful not to damage the injector tip.
  1. Install in the reverse order of removal.
scientia non olet · About Mike's Workshop Manuals