Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2018 >> Forte S >> Repair and Diagnosis >> External Pages >> Different car >> Section 132 (Integrated Gateway Power Module Diagnosis) >> DTC B164D-00: CAN Time-Out WPC >> Wiring Inspection >> Circuit Inspection >> Notes

Circuit Inspection: Notes

WARNING: This page is about a different car, the 2017 Kia Niro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: IGPM System Circuit
G12328187Courtesy of KIA MOTORS AMERICA, INC.
WIRELESS POWER CHARGER (WPC) INSPECTION SPECIFICATION

Inspection Condition (+) Probe (-) Probe Specification
Connector Terminal Connector Terminal
  1. Ignition "OFF".
  2. Disconnect the electrical connector(s) from the concerned component.
  3. Ignition "ON".
 WPC connector 2 (Input) Chassis ground - B+
WPC connector 1 (Power) Chassis ground - B+
  1. Ignition "OFF".
  2. Disconnect auxiliary battery (-) cable.
  3. Disconnect the electrical connector(s) from the concerned component.
 WPC connector 12 (Ground) Chassis ground - below 1Ω
Good 
No Good 
scientia non olet · About Mike's Workshop Manuals