Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2018 >> Cadenza Technology >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Program (Esp) System >> Troubleshooting >> When Ignition Key Is Turned ON (engine Off), The ABS Warning Lamp Does Not Light Up >> Inspection Procedures >> Problem Verification

Problem Verification

  1. Disconnect the connector from the ESP control module and turn the ignition switch ON.
  2. Does the ABS warning lamp light up?

    YES 

    • Inspect again after replacing the ESP HECU.

    NO 

    • Check the power source for the ABS warning lamp.