MFC/LKAS/LDWS Switch Operating Test

■ Perform MFC/LKAS/LDWS switch operating test as below when MFC/LKAS/LDWS switch is replaced. 

1. Ignition "On" & Engine "On".
2. Activate the MFC/LKAS/LDWS switch.
3. Check the light of MFC/LKAS/LDWS on the Instrument Cluster.

   Specification  : Refer to Fig 1 below.

   Fig 1: Checking Light Of MFC/LKAS/LDWS On Instrument Cluster

   Courtesy of KIA MOTORS AMERICA, INC.