Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2017 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 22 (Manual Transaxle Control System - 1.6L (M6CF1)) >> Control Shaft Complete >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the air cleaner assembly.

    (Refer to Engine Mechanical System - "AIR CLEANER ")

  2. Remove the battery and battery tray.

    (Refer to Engine Electrical System - "BATTERY ")

  3. Set shift lever to "N" position.
  4. Remove the control cable from the control shaft after remove the pin (A) and washer (B).
    Fig 1: Locating Pin And Washer
    G12227483Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the control shaft assembly after loosen the bolts.

    Tightening torque  :

    19.6 ~ 26.5 N.m (2.0 ~ 2.7 kgf.m, 14.5 ~ 19.5 lb-ft)

    Fig 2: Locating Control Shaft Assembly
    G12227484Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals