Repair Procedures: Installation
WARNING: This page is about a different variant/trim than selected.
NOTE:
When replacing a clutch housing or transaxle assembly, the wiring bracket should be installed in accordance with the clutch housing type.
| Items | A type | B type |
|---|---|---|
| Clutch housing | ||
| Wiring bracket |
CAUTION:
If the oil seal on the transaxle case side is damaged and fluid is leaking, replace the oil seal with a new unit. When installing the new oil seal, use the specialized tool (oil seal installer, 09431-26100).
- Install in the reverse order of removal.
- Adding manual transaxle fluid after Installing the manual transaxle.
(Refer to Manual Transaxle System - "MANUAL TRANSAXLE FLUID ")