Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2017 >> Soul ! >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Control System - 1.6L) >> Crankshaft Position Sensor (CKPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the engine room under cover.

    (Refer to Engine Mechanical System - "ENGINE ROOM UNDER COVER ")

  3. Disconnect the crankshaft position sensor connector (A) and remove the sensor (B) after removing the installation bolt.
    Fig 1: Locating Crankshaft Position Sensor And Connector
    G12227249Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals