Check OTS Performance

Ignition "OFF".
Disconnect OTS connector.

Measure resistance between Pin No. 1 (signal) terminal and Pin No. 2 (ground) terminal of the OTS. (Component Side)

Specification: Refer to specification

Temperature (°C/°F)	Resistance (kΩ)
-40°C (-40°F)	52.15kΩ
-20°C (-4°F)	16.52kΩ
0°C (32°F)	6.0kΩ
20°C (68°F)	2.45kΩ
40°C (104°F)	1.11kΩ
60°C (140°F)	0.54kΩ
80°C (176°F)	0.29kΩ

Is the measured value within specification?
YES
- Go to "VERIFICATION OF VEHICLE REPAIR " procedure.
NO
- Carefully re-do this troubleshooting guide steps.
- If no problems were found with the circuits or connectors, replace the EOTS and go to "VERIFICATION OF VEHICLE REPAIR " procedure.